How to Embark Sequins in Embroidery

How to Embark Sequins in Embroidery

Sequins are sparkling discs of metal or plastic, used in embroidery to create a shimmering effect on garments.sequins embroidery Depending on how they are used, sequins can be scattered sparingly for a subtle sparkle or concentrated in specific areas for more dramatic, eye-catching results. The sequins are either glued to the fabric or stitched on. The latter is more common as it allows the embroiderer to reposition sequins after the fact for a more uniform look.

Embarking on a project involving sequins requires a few specialized tools to ensure precision and ease during the process.sequins embroidery Sharp scissors, a pair of fine-tipped needles and a thimble are essential for sewing by hand, while an embroidery hoop helps keep the fabric taut, preventing puckering and allowing for even stitching. Thread that matches the color of the sequins will help to achieve a seamless appearance.

For machine embroidery, a special sequins foot is usually required to prevent the stitches from catching on the protruding disks.sequins embroidery However, it’s possible to use standard machine embroidery techniques for embroidered sequins, provided that the following steps are taken into consideration:

Choose the right stabilizer.sequins embroidery The type of fabric will determine which stabilizing method is best. For example, a polyester batting may be more stable than cotton or wool. A polyester batting can also be pre-shrunk to avoid lint buildup on the needle.

Select the right needles.sequins embroidery Sequins come in a dizzying array of shapes and sizes, so be sure to test your thread and needles on scrap fabric to make sure that they work well together. The needle should be thin enough to fit through the holes in the sequins, but thick enough that it will not tangle easily. If the sequins are glued to the fabric, a needle threader is often helpful for making it easier to thread the needle.

Thread the needle and insert it into the fabric at the edge of a sequin (A).sequins embroidery Thread on the first stitch and bring the needle back up through the center of the next sequin, pulling the thread tight to secure it. Repeat until all the sequins are secured in place. If the sequins are unglued, they should be knotted on the back for maximum durability.

Another method for securing the sequins is to thread a seed bead onto the needle and pass it through the centre hole of each sequin. This can add extra glitz to your project and is an excellent way to cover a stitch that may have been made by mistake.

Sewing sequins can be time consuming, but it’s worth the effort to produce an exquisite design. Be sure to pay close attention to the hems and seams, as some fabrics fray more than others. It’s also preferable to choose woven sequins with a taffeta or chiffon backing, instead of glued ones, so that there are no glue stains on the back of the fabric. It’s also a good idea to remove sequins in the seam allowance, so that they can be saved for later when the garment is ready for wear.

Tags:sequins emboidery